T&S BRASS BL-5500-07
PANEL SUPPLY NIPPLE W/ LOCK NUT & WASHER
SKU: TSBL-5500-07
Condition: NEW
A lock is a mechanical or electronic fastening device that is released by a physical object (such as a key, keycard, fingerprint, RFID card, security token, coin etc.), by supplying secret information (such as a number or letter permutation or password), or by a combination thereof or only being able to be opened from one side such as a door chain.
A lock may also be a clamp or a stop designed to prevent the flow of a liquid or the motion of a caster or wheel
A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
Panels of all types are widely used in the design of restaurant equipment. A panel is usually part of the housing, or an access covering made of stainless steel, painted aluminum, or molded plastic and is generally water resistant and easily cleaned. Panels may have fin type of openings (louvers) to allow air to flow across interior components. Panels may also be "control panels" having operating buttons, displays, dials or switches.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
T&S products are highly acclaimed throughout the industry for being well-built, long-lasting and reliable. Rigorous testing and a focus on interchangeability have helped set T&S apart from the competition for nearly 70 years.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: TS
Width: 4.05 in (10.29 cm)
Height: 1.4 in (3.56 cm)
Length: 4.05 in (10.29 cm)
Unit of Measure: Each (EA)