VALVE CRO6-0/60-1/2 REGULATOR PRESSURETRUE 800350
A pressure regulator is a control valve that reduces the input pressure of a fluid or gases to a desired value at its output. Regulators are used for gases and liquids, and can be an integral device with an output pressure setting, a restrictor and a sensor all in the one body, or consist of a separate pressure sensor, controller and flow valve.
A regulator is a device for controlling the rate of working of machinery or for controlling fluid or gas flow or pressure. Regulators can be designed to control anything from gases or fluids, to light or electricity. Speed and pressure can be regulated by electronic, mechanical, or electro-mechanical means.
A voltage regulator is a system designed to automatically maintain a constant voltage level. A voltage regulator may use a simple feed-forward design or may include negative feedback. It may use an electromechanical mechanism, or electronic components. Depending on the design, it may be used to regulate one or more AC or DC voltages.
A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve. More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. They can be electromechanical actuators such as an electric motor or solenoid, pneumatic actuators which are controlled by air pressure, or hydraulic actuators which are controlled by the pressure of a liquid such as oil or water. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.
Since 1945 True has taken pride in both manufacturing American made goods and also creating jobs for Americans. True’s 3.7 million square feet of manufacturing facilities are all located in he US. True also supports other American businesses by buying 75% of raw materials & components from American made suppliers.