Structural Concepts 38182
NUT HEX 1/4-20 EXT TOOTH LCK WASHER
SKU: STC38182
Condition: NEW
Having six edges, or having a cross-section in the form of a hexagon. Hex Head may refer to screws, bolts, or wrenches such as Allen keys, Allen screws, or Allen wrenches.
A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
Established in 1972, Structural Concepts is a leading innovator of temperature-controlled food display cases for supermarket and foodservice operators.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: STC
Width: 1.0 in (2.54 cm)
Height: 1.0 in (2.54 cm)
Length: 1.0 in (2.54 cm)
Unit of Measure: Each (EA)