Perlick F9135

SCREW ADJUSTING:TRYCOCK VALVE 12-24 UNC

A screw is a type of fastener, in some ways similar to a bolt typically made of metal, and characterized by a helical ridge, known as a male thread (external thread). Screws are used to fasten materials by digging in and wedging into a material when turned, while the thread cuts grooves in the fastened material that may help pull fastened materials together and prevent pull-out.

A screw drive is a system used to turn a screw. At a minimum, it is a set of shaped cavities and protrusions on the screw head that allows torque to be applied to it. Usually, it also involves a mating tool, such as a screwdriver, that is used to turn it. Other examples include Phillips head screws and screwdrivers, and Allen hex screws and wrenches.

A trycock is a spout for withdrawing a small quantity of liquid (as for testing). On boiling systems, this valve is designed to be used as an indication of water level, either to check the water gauge indication or as a method of checking water level when the water gauge is inoperative.

Valves are widely used in different restaurant equipment designs. A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. In an open valve, fluid flows in a direction from higher pressure to lower pressure. 

Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow, allowing control over a variety of operational requirements.