VALVE SLIDE NEW STYLE G HOOK
Slide or Door Slide or Drawer Slide are blanket terms used in the industry for all ball bearing slides, telescopic slides, drawer runners, linear slides, rails, and various other guides. Slides are used in refrigerators and freezers, merchandisers, holding and service cabinets and more. A slides movement describes exactly how the slide operates inside of the cabinet. Typically, this is either telescoping movement, which occurs in stages or progressive movement where the various slide members move simultaneously.
A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve. More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. They can be electromechanical actuators such as an electric motor or solenoid, pneumatic actuators which are controlled by air pressure, or hydraulic actuators which are controlled by the pressure of a liquid such as oil or water. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.
Prince Castle was founded in 1955 as an innovator in restaurant operational efficiencies. From refrigeration, holding, steaming and toasting and smallwares solutions, all products are chef-tested, and quality approved.
Click Image to Zoom In