Marshall Air 156437
LEG TUBE W/BULLET FOOT
SKU: MSA156437
Condition: NEW
As opposed to a caster, which rolls and may have a locking mechanism, a foot is a stationary weight-bearing implement at the base of a piece of restaurant equipment. It may be made of metal, plastic, or rubber and usually screws into the frame or base of the machine. A Foot Pedal refers to a foot controlled actuator or valve such as that used to turn on a machine or a faucet.
(Note: "foot" may also refer to a unit of measurement of length, width, and depth covering a distance equal to 12 inches.)
A leg is used to support and elevate a piece of equipment or a prep table. Legs are weight bearing and may be adjustable or locking. Equipment legs may be made of metal, plastic, or composites. Legs may have built-in leveling feet and can be used with floor glides for mobility.
A tube (tubular section, tubing, or hollow cylinder) usually but not necessarily of circular cross-section, used mainly to convey substances which can flow liquids and gases (fluids), slurries, powders and masses of small solids. Plastic tubing is widely used for its light weight, chemical resistant, non-corrosive properties, and ease of making connections. A tube may also reference a florescent light bulb or a housing of lamps or LEDs.
Marshall specializes in hamburger conveyor broilers, commercial charbroilers, toaster conveyors, countertop food warmers, food holding and ventilation systems.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: MSA
Width: 1.65 in (4.19 cm)
Height: 1.6 in (4.06 cm)
Length: 8.05 in (20.45 cm)
Weight: 0.935 lbs (424.11 g)
Unit of Measure: Each (EA)