Lancer 1500-130A
TRANSFER VALVE SWIVEL ELBOW FITTINGS
SKU: LAN1500-130A
Condition: NEW
An elbow is installed between two lengths of pipe (or tubing) to allow a change of direction, usually a 90° or 45° angle; 22.5° elbows are also available. The ends may be machined for butt welding, threaded (usually female), or socketed. When the ends differ in size, it is known as a reducing (or reducer) elbow.
A fitting is any machine component, piping or tubing part that can attach or connect two or more larger parts. Examples are couplings, compression fittings, and piping and plumbing fittings.
Valves are widely used in different restaurant equipment designs. A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow, allowing control over a variety of operational requirements.
Lancer began as a parts manufacturer for beverage dispensing machines. Since becoming a full line equipment manufacturer starting in 1971, Lancer has developed dozens of original, patented models from concept to full production, including beverage and ice dispensers, valves, carbonators, syrup pumps, draft systems, and more.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: LAN
Width: 5.45 in (13.84 cm)
Height: 3.15 in (8.0 cm)
Length: 5.95 in (15.11 cm)
Weight: 0.2 lbs (90.72 g)
Unit of Measure: Each (EA)