Cornelius EL-851-A
HEATER DRAIN DEFROST 12W FOGEL
SKU: ICO1034981
Condition: NEW
The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer: For every 6, 8, 10, 12 or 24 hours of compressor operation it turns on a defrost heater for 15 minutes to half an hour.
A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time.
A drain is a channel, conduit, or pipe designed to carry away or channel superflous liquids for disposal or reclamation. A drain assembly is one or more components of a larger mechanism that facilitates as a drain. A drain assembly component may be a pipe, stopper, pan, basket, valve, filter, plug, hose etc.
A heating element converts electrical energy into heat through the process of Joule heating. Electric current through the element encounters resistance, resulting in heating of the element. This process is independent of the direction of current.
Cornelius is a top partner for the world’s leading beverage brand owners, restaurants, convenience stores, and distributors. With over 80 years of experience in the beverage dispensing industry, Cornelius manufactures and markets an extensive range of beverage equipment, ice makers and dispensers, refrigerated beverage dispensers, granita machines, undercounter ice makers, and countertop and hotel ice dispensers.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: ICO
Width: 4.7 in (11.94 cm)
Height: 0.9 in (2.29 cm)
Length: 10.5 in (26.67 cm)
Weight: 0.04 lbs (18.14 g)
Unit of Measure: Each (EA)