Hobart WL-020-17
WASHER LOCK BEARING 25MM X 42MM
SKU: HOBWL-020-17
Condition: NEW
Bearings are widely used in restaurant equipment. They limit motion and reduce friction between moving parts. A bearing may provide for free linear or rotational movement of the part. Bearings are classified broadly according to the type of operation, the motion allowed, or to the direction of the load applied to the parts.
A lock is a mechanical or electronic fastening device that is released by a physical object (such as a key, keycard, fingerprint, RFID card, security token, coin etc.), by supplying secret information (such as a number or letter permutation or password), or by a combination thereof or only being able to be opened from one side such as a door chain.
A lock may also be a clamp or a stop designed to prevent the flow of a liquid or the motion of a caster or wheel
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
Hobart is a leading manufacturer of food equipment products for cooking, food preparation, dishwashing, waste reduction, weighing and packaging. Established in 1897 in Troy, Ohio, Hobart has been dedicated for more than a century to supporting commercial and institutional foodservice and food retail professionals by providing premium equipment they can trust.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: HOB
Width: 1.55 in (3.94 cm)
Height: 0.2 in (0.51 cm)
Length: 1.6 in (4.06 cm)
Unit of Measure: Each (EA)