Grindmaster Cecilware D064EL
FAUCET ASSEMBLY W/ SHANK WING NUT &
SKU: GMD064EL
Condition: NEW
A faucet or a tap (also spigot) is a valve controlling the release of a liquid or gas. Turning a valve knob or lever adjusts flow by varying the aperture of the control device in the valve assembly. The result when opened in any degree is a choked flow. Its rate is independent of the viscosity or temperature of the fluid or gas in the pipe, and depends only weakly on the supply pressure, so that flow rate is stable at a given setting.
A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
A wingnut, wing nut or butterfly nut is a type of nut with two large metal "wings", one on each side, so it can be easily tightened and loosened by hand without using tools. A similar fastener with a male thread is called a wing screw.
A schank is the long, narrow part of a tool connecting the handle to the operational end. A shank is frequently used with a faucet or dispensing control knob or handle. The unthreaded part of the shaft of a bolt is also called the shank.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: GM
Width: 4.0 in (10.16 cm)
Height: 2.35 in (5.97 cm)
Length: 5.25 in (13.34 cm)
Unit of Measure: Each (EA)