Grindmaster Cecilware A1211015
FAUCET SHANK WITH SHUT OFF VALVE-S
SKU: GMA1211015
Condition: NEW
A faucet or a tap (also spigot) is a valve controlling the release of a liquid or gas. Turning a valve knob or lever adjusts flow by varying the aperture of the control device in the valve assembly. The result when opened in any degree is a choked flow. Its rate is independent of the viscosity or temperature of the fluid or gas in the pipe, and depends only weakly on the supply pressure, so that flow rate is stable at a given setting.
A schank is the long, narrow part of a tool connecting the handle to the operational end. A shank is frequently used with a faucet or dispensing control knob or handle. The unthreaded part of the shaft of a bolt is also called the shank.
A shutoff is a device (a gate, valve, shaft, cam or breaker) designed to interrupt the flow of a solid, liquid, or a gas and in electrical components, the flow of current. Shutoffs may also be used as brakes in slowing or stopping the motion of a system or component. Shutoffs may be manually or automatically actuated in response to connected signaling or sensing systems.
Valves are widely used in different restaurant equipment designs. A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow, allowing control over a variety of operational requirements.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: GM
Width: 2.8 in (7.11 cm)
Height: 1.75 in (4.45 cm)
Length: 3.25 in (8.26 cm)
Unit of Measure: Each (EA)
