Giles 38365
ASSEMBLY FUSE CONTROLLER TRANSFORMER
SKU: GIL38365
Condition: NEW
Controls of all kinds are integral parts of restaurant equipment operation. A control is a switch or other device by which a machine is regulated. A control may be manual or automatically operated. An electro-mechanical control typically consists of multiple relays, timers, and/or counters wired together on an enclosure panel. Electro-mechanical control is also referred to simply as "Relay Control", which is a more accurate term since solid state electronic relays, timers, and counters are standard components. Contactors, motor and compressor starters, valves, thermostats, and other output devices are used to turn on/off motors, indicator lights, heating elements, and other components used in the equipment.
A fuse is an electrical safety device that operates to provide over-current protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby stopping or interrupting the current. Once a fuse has blown, it must be replaced or rewired, depending on the type. There are thousands of different fuse designs which have specific current and voltage ratings, breaking capacity and response times, depending upon the function of the piece of restaurant equipment.
In restaurant equipment, a transformer is an electrical component that is used to convert the voltage of the power source to a different level. This is necessary because different types of equipment require different levels of voltage to operate. For example, some equipment may require a higher voltage to run, while other equipment may require a lower voltage. The transformer steps up or steps down the voltage to match the requirements of the equipment. This allows the equipment to function properly and prevents damage to the equipment or electrical system. Transformers are commonly used in commercial kitchen equipment such as ovens, fryers, mixers, dish washers, ice machines and other units that require a specific voltage to operate.
Since 1952, Giles has been dedicated to producing high quality, durable, user-friendly and cost effective food service solutions. Giles produces a full line of Ventless Hoods, Round Kettle Fryers, Banked Fryers, Ventless Fryers, Food Prep Equipment and Heated Merchandisers.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: GIL
Width: 0.45 in (1.14 cm)
Height: 0.4 in (1.02 cm)
Length: 4.35 in (11.05 cm)
Weight: 1.3 lbs (589.67 g)
Unit of Measure: Each (EA)