Cleveland S109797
TERMINAL BLOCK ASSEMBLY 7POLE BOILER
SKU: CLES109797
Condition: NEW
Parts of a lock assembly include a cylinder or lock body, where a key is inserted. When locked, the cylinder engages a series of spring-loaded pins that keep the cylinder from turning. When a key is inserted, the uneven edge pushes the pins upward to fit the key’s height in that location within the lock body. Essentially, it recognizes the correct key when the pins move into their proper places. This “opens” the cylinder, allowing the bolt to move, and you to open the lock. The lock engages a piece of metal or plastic that extends from the door into the receiver and holds it closed. In addition, a lock assembly may include mounting components, brackets, washers and bolts.
A terminal is an electrical connector acting as the reusable interface to a conductor and creating a point where external circuits can be connected. A terminal may simply be the end of a wire or it may be fitted with a connector or fastener. Most electrical connectors have a plug that connects to a socket. The connection may be removable, require a tool for assembly and removal, or serve as a permanent electrical joint between two points. An terminal adapter can be used to join dissimilar connectors.
A screw terminal is a type of electrical connector where a wire is held by the tightening of a screw. The wire may be wrapped directly under the head of a screw, may be held by a metal plate forced against the wire by a screw, or may be held by what is, in effect, a set screw in the side of a metal tube. The wire may be directly stripped of insulation and inserted under the head of a screw or into the terminal. Otherwise, it may be either inserted first into a ferrule, which is then inserted into the terminal, or else attached to a connecting lug. which is then fixed under the screw head. The terminals easily can be re-used in the field, allowing for the replacement of wires or equipment, generally with standard hand tools. Screw terminals usually avoid the requirement for a specialized mating connector to be applied to the ends of wires.
Cleveland Range is a leading manufacturer and designer of institutional, commercial, and restaurant grade steam cooking equipment. Cleveland Range has a long and proud history of serving the foodservice industry with quality and innovative cooking equipment found in commercial kitchens everywhere. Products include ...
- Steamers
- Combination steamer-ovens
- Kettles
- Braising pans
- Specialty application ovens
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: CLE
Width: 3.95 in (10.03 cm)
Height: 1.3 in (3.3 cm)
Length: 4.4 in (11.18 cm)
Unit of Measure: Each (EA)