Bunn 27574.0000
WASHER FAUCET SEALING
SKU: BU27574.0000
Condition: NEW
A faucet or a tap (also spigot) is a valve controlling the release of a liquid or gas. Turning a valve knob or lever adjusts flow by varying the aperture of the control device in the valve assembly. The result when opened in any degree is a choked flow. Its rate is independent of the viscosity or temperature of the fluid or gas in the pipe, and depends only weakly on the supply pressure, so that flow rate is stable at a given setting.
A mechanical seal is a device that helps join systems or mechanisms together by preventing leakage (e.g. in a pump system), maintaining temperature, containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets or o-rings.
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Spring washers, which have axial flexibility are used to prevent fastening or loosening due to vibrations. Locking (lock) washers prevent fastening or loosening by preventing unscrewing rotation of the fastening device.
Since 1957, Bunn-O-Matic Corporation (BUNN®) has been at the forefront of dispensed beverage equipment manufacturers. BUNN has become a global partner you can count on for reliable beverage equipment and outstanding post-purchase support wherever customers are served.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: BU
Width: 0.35 in (0.89 cm)
Height: 0.1 in (0.25 cm)
Length: 0.4 in (1.02 cm)
Weight: 0.01 lbs (4.54 g)
Unit of Measure: Each (EA)
