Bunn 26443.0000
REDUCER NYL HOSE BARB .38X.25
SKU: BU26443.0000
Condition: NEW
Hose barbs are cylindrical pieces or parts for attaching and securing of hoses (tubing). The barb-like rings on the cylindrical piece allow for an easy push-connection of flexible-plastic or rubber tubing that is not so easily disconnected. Hose barbs are used in machine perfusion and chemistrylaboratory equipment. Hose barb fittings are small curved, bent or T-shaped pipes, hoses or tubes with hose barbs on at least one side used to join two or more pieces of piping (hosing, tubing) together.
A hose is a flexible hollow tube designed to carry fluids from one location to another. Hoses are also sometimes called "pipes" (the word pipe usually refers to a rigid tube, whereas a hose is usually a flexible one), or more generally "tubing". The shape of a hose is usually cylindrical (having a circular cross section).
A reducer changes the size of a pipe from a larger to a smaller bore (inner diameter). Alternatively, reducer may refer to any fitting which causes a change in pipe diameter. This change may be intended to meet hydraulic flow requirements of the system or adapt to existing piping of a different size. The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. Although reducers are usually concentric, eccentric reducers are used as needed to maintain the top or bottom of pipe level.
Speed reducers are mechanical devices that help drive systems (motors) maintain optimal speed and torque for the application. Also known as gearboxes and gear drives, they lower the speed of rotation of the input shaft by a certain ratio and increase the power transmitted to the output shaft by the same ratio. Ratio multipliers increase the speed reduction and torque supplied by a speed reducer by a certain ratio and are suitable for parallel setups. Mounting bases, torque arms, and flange couplings are accessories used with speed reducers. They are often used in applications where the speed reducer will not be directly attached to the drive mechanism.
Since 1957, Bunn-O-Matic Corporation (BUNN®) has been at the forefront of dispensed beverage equipment manufacturers. BUNN has become a global partner you can count on for reliable beverage equipment and outstanding post-purchase support wherever customers are served.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: BU
Width: 0.45 in (1.14 cm)
Height: 0.35 in (0.89 cm)
Length: 1.55 in (3.94 cm)
Weight: 0.01 lbs (4.54 g)
Unit of Measure: Each (EA)