FAUCET SPRING COMPRESSION-CONAlways OEM - Nothing generic, "equivalent" or off-brand.
A compression fitting is comprised of a sleeve, a nut, and the fitting body itself. The sleeve acts as the seal when the nut compresses it into the fitting body.
A faucet or a tap (also spigot) is a valve controlling the release of a liquid or gas. Turning a valve knob or lever adjusts flow by varying the aperture of the control device in the valve assembly. The result when opened in any degree is a choked flow. Its rate is independent of the viscosity or temperature of the fluid or gas in the pipe, and depends only weakly on the supply pressure, so that flow rate is stable at a given setting.
A spring is an elastic object that stores mechanical energy. Springs are typically made of spring steel. There are many spring designs. In everyday use, the term often refers to coil springs. When a conventional spring, without stiffness variability features, is compressed or stretched from its resting position, it exerts an opposing force approximately proportional to its change in length.
Since 1957, Bunn-O-Matic Corporation (BUNN®) has been at the forefront of dispensed beverage equipment manufacturers. BUNN has become a global partner you can count on for reliable beverage equipment and outstanding post-purchase support wherever customers are served.
Click Image to Zoom In