KNOB; GAS VALVE; ON-OFF [XTG]
In foodservice equipment, a knob may be as simple as a push button or "palm button". A control knob is a rotary control used to provide input to a device when grasped by an operator and turned, so that the degree of rotation corresponds to the desired input . Such knobs are one of the most common components in restaurant equipment control systems and are used to modulate a wide variety of settings such as temperature, viscosity, speed and more.
A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve. More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. They can be electromechanical actuators such as an electric motor or solenoid, pneumatic actuators which are controlled by air pressure, or hydraulic actuators which are controlled by the pressure of a liquid such as oil or water. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.
The Bakers Pride Oven Company was founded in New York in the mid 1940’s, and initiated one of the most dramatic innovations in the history of American cuisine by inventing the modern production pizza oven. Today, Bakers Pride is world renowned for high quality commercial baking, cooking, and broiling equipment.
Click Image to Zoom In