Avtec HD PUL0301
PULLEY 4.4 IDLER RX0183 W/SS BEARING
SKU: AVTHDPUL0301
Condition: NEW
Bearings are widely used in restaurant equipment. They limit motion and reduce friction between moving parts. A bearing may provide for free linear or rotational movement of the part. Bearings are classified broadly according to the type of operation, the motion allowed, or to the direction of the load applied to the parts.
An idler or idler-wheel is wheel or pulley which serves only to transmit rotation from one shaft to another (or as a to guide or tension a belt), in applications where it is undesirable to connect them directly.
A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt, or transfer of power between the shaft and cable or belt. In the case of a pulley supported by a frame or shell that does not transfer power to a shaft, but is used to guide the cable or exert a force, the supporting shell is called a block, and the pulley may be called a sheave.
Avtec’s commercial kitchen ventilators and air handling systems represent a breakthrough in energy efficiency, functionality and savings. Avtec commercial vent hoods are designed to meet a wide variety of functional needs and budgets, and the full line of Avtec dish return conveyors offer outstanding labor-saving designs for high-volume food preparation.
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: AVT
Width: 4.75 in (12.07 cm)
Height: 1.0 in (2.54 cm)
Length: 4.75 in (12.07 cm)
Unit of Measure: Each (EA)