VALVE GAS SHUTOFF 1/2 120VAC
A shutoff is a device (a gate, valve, shaft, cam or breaker) designed to interrupt the flow of a solid, liquid, or a gas and in electrical components, the flow of current. Shutoffs may also be used as brakes in slowing or stopping the motion of a system or component. Shutoffs may be manually or automatically actuated in response to connected signaling or sensing systems.
A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve. More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. They can be electromechanical actuators such as an electric motor or solenoid, pneumatic actuators which are controlled by air pressure, or hydraulic actuators which are controlled by the pressure of a liquid such as oil or water. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.
In 1937, Anetsberger Brothers entered the foodservice equipment industry with the introduction of its first thermostatically controlled counter fryer. Since then, ANETS has developed numerous other product firsts, including automatic lifts on gas fryers, automated production tables, pyrolytic self-cleaning char-broilers, dough rollers with built-in dough dockers, and many more.
Click Image to Zoom In
Click Arrows to Expand