Discount Restaurant Equipment Parts
< View All KOLD-DRAFT PARTS
Genuine OEM KoldDraft 515102201

Nothing Generic, "Equivalent", or Off Brand.™

KoldDraft 515102201

EXP VALVE- DRIER ASM

GENUINE KOLD-DRAFT PARTS ONLY
SKU: KD515102201

Condition: NEW

$284.87 $372.38
A filter-drier in a refrigeration or air conditioning system has two essential functions: one, to absorb system contaminants, such as water, which can create acids, and two, to provide physical filtration. Appliance driers are usually installed in the liquid line, as close to the metering device as possible. If the metering device is a capillary tube, the outlet of the drier is typically sized to allow brazing the capillary tube into the drier. The screen in the drier is placed far enough away so that the capillary tube can be inserted into the drier without blocking the refrigerant flow into the capillary tube.  The position of the drier should be as vertical as possible with the flow in the downward direction. This position will also allow the drier to act as a liquid seal for the capillary tube, to ensure pure liquid refrigerant flow through the capillary tube.

Valves are widely used in different restaurant equipment designs. A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. In an open valve, fluid flows in a direction from higher pressure to lower pressure. 

Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow, allowing control over a variety of operational requirements. 

KOLD-DRAFT manufactures a wide-range of commercial ice machines, and commercial ice makers for hotels, restaurants, bars, hospitals, cruise lines, and institutions. KOLD-DRAFT equipment makes pure ice cubes in three sizes as well as crushed ice.

Genuine OEM KOLD-DRAFT 515102201
General Commodity Codes:
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: KD

Dimensions & Details:
 Width: 5.9 in (14.99 cm)
Height: 3.9 in (9.91 cm)
Length: 7.0 in (17.78 cm)
Unit of Measure: Each (EA)