Discount Restaurant Equipment Parts

Genuine OEM KoldDraft 102101101

Nothing Generic, "Equivalent", or Off Brand.™

KoldDraft 102101101

DEFROST VALVE COIL

GENUINE KOLD-DRAFT PARTS ONLY
SKU: KD102101101
$127.91 $167.20

Various coils are used in restaurant equipment componentry. An electromagnetic coil is an electrical conductor such as a wire in the shape of a coil, spiral or helix. They are used in electrical engineering, in applications where electric currents interact with magnetic fields, in devices such as electric motors, generators, inductors, electromagnets, transformers, solenoid valves, and sensor coils. Either an electric current is passed through the wire of the coil to generate a magnetic field, or conversely an external time-varying magnetic field through the interior of the coil generates an EMF (voltage) in the conductor.

In refrigeration equipment, the "condenser coil" dispels hot air to the outside of the space. The refrigerant then loops back to the compressor, gets cold again, absorbs heat and disperses it to the outside. As long as the compressor is running, the refrigerant keeps up this continuous loop. Extracting heat from the storage space and transferring it to the refrigerant is the function of the "evaporator coil".

The defrost mechanism in a refrigerator heats the cooling element (evaporator coil) for a short period of time and melts the frost that has formed on it. The resulting water drains through a duct at the back of the unit. Defrosting is controlled by an electric or electronic timer: For every 6, 8, 10, 12 or 24 hours of compressor operation it turns on a defrost heater for 15 minutes to half an hour.

A defrost thermostat opens the heater circuit when the evaporator temperature rises above a preset temperature, 40°F (5°C) or more, thereby preventing excessive heating of the freezer compartment. The defrost timer is such that either the compressor or the defrost heater is on, but not both at the same time.

Valves are widely used in different restaurant equipment designs. A valve is a device that regulates, directs or controls the flow of a fluid (gases, steam, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. In an open valve, fluid flows in a direction from higher pressure to lower pressure. 

Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow, allowing control over a variety of operational requirements. 

KOLD-DRAFT manufactures a wide-range of commercial ice machines, and commercial ice makers for hotels, restaurants, bars, hospitals, cruise lines, and institutions. KOLD-DRAFT equipment makes pure ice cubes in three sizes as well as crushed ice.

General Commodity Codes:
HTS Category Code: 8208.30.00
UNSPC Category Code: 48100000
NAICS Code: 333241
Manufacturer Code: KD

Dimensions & Details:
Width: 3.4 in (8.64 cm)
Height: 2.5 in (6.35 cm)
Length: 5.85 in (14.86 cm)
Unit of Measure: Each (EA)

Fits Models / Other Detail:

GB420
GB420R
GB420W
GB430
GB430R
GB430W
GB431A
GB431R
GB431W
GB440
GB440R
GB440W
GB441A
GB441R
GB441W
GB450
GB450A
GB450W
GB451A
GB451W
GB561LC
GB561LHK
GB561X
GB620R
GB620W
GB630A
GB630R
GB630W
GB640
GB640A
GB640R
GB640W
GB650
GB650A
GB650W
GT330A
GT330W
GT331A
GT331W
GT340A
GT340W
GT341A
GT341W
GT350A
GT350W
GT351A
GT351W
GT361
GT36X
GT550
GT550A
GT550W
GT551A
GT551R
GT551W
GT561
GT56X